Quality & Testing
- By Super User
- In: Blog Page
Super Pave Cold Mix Patch is produced under strict
quality adherence to the ISO 9001/2000 standards.
Our testing is done by two of the Caribbean's
foremost testing agencies.
Super Pave
Trinidad & Tobago
-
Super Pave
Asphalt mix processing plant
-
Super Pave
Asphalt mix processing plant
-
Super Pave
Asphalt mix processing plant
Super pave cold mix patch is a ready to use cold
mix asphalt made from selected blue limestone
aggregates and the world famous Trinidad Lake
Asphalt (TLA). These aggregates are carefully
graded an washed before being used.
Super Pave Cold Mix Patch may become stiff after lengthy storage..
This is normal and will not adversely affect the mix. Whenever this happens an ordinary masonry trowel is used take the material out from the bucket it is then separated
using the trowel. This will loosen the material to a workable consistency. Caution must be taken when using Super Pave Cold Mix Patch. It is recommended that gloves, goggles and where appropriate dust masks are used.
"Super Pave can provide quality goods and products to our customers and clients who we must always hold in high esteem"
Paving Your Way!!!!!!! ..
Video
Benefits
Apart from the engineering and construction uses of Super Pave Cold Mix
Patch, there are other economic and social benefits that can be derived by the
use of this product. Here are a few:
Some Economic Benefits:
1. The shelf life of this product is greater than the regular type Asphalt Mixes
2. Because of the greater shelf life of this product, roads in remote areas which are
inaccessible to large road paving equipment can be repaired by taking small
amounts of the Super Pave Cold Mix Patch to successfully conduct repairs.
3. If during day’s work there are interruptions due to rain or excessive traffic etc. ,
the remaining Super Pave Cold Mix Patch that is already on site can be covered
or left uncovered, and used when work resumes.
Superpave mix design is a structured approach consisting of the following four steps:
1. selection of materials,
2. selection of design aggregate structure,
3. selection of design asphalt binder content, and
4. evaluation of moisture susceptibility.
Our Quality Conforms to Standards
